TTM19060 checking fixture has high measurement accuracy, no fear of deformation, low maintenance cost and good convenience. Key product characteristic inspection, characteristic line inspection, function hole inspection, area detection which is prone to deformation in assembly process, for automobile assembly and production function matching inspection. In the production process of automotive parts, on-line inspection of automotive parts is realized, which ensures the rapid judgment of the quality status of automotive parts in production, ensures the safety and processing speed of automotive assembly, and improves the quality of automotive parts.
1.Visual inspection to check part sharp edges ,cracks and burrs.
2.Using GO NOGO pin to check the size of hole
3.Open all the clamp1,load the part on the body
4.Adjusting the part keep it well contact nets and lacat it with B .
6.Use the check pin of P1 to check the hole.
7.Use the FEELER A(GOSØ2.3/NOGOSØ3.7)and FEELER B(GOSØ2.0/NOGOSØ4.0) to check surface of the part.
8.Use FLUSH A(±1) to test the material edge of the product.
9.Close rotating mechanismes.
10.checking part trimming with +/1 scribe line
11.Recording results on the inspection sheet
12.Open all the clamp1 take the part out of the gauge.
Contact Person: Alex Guo