Auto Seat Part Jig Fixture Components Customized 1200 * 1000 * 630 Mm

Product Description

All Flush rail surfaces to be tangential to the outer most point of the surface being
measures and have a minimum surface of 35mm. The Flush surface must be flat.

All Gap feeler rail surfaces to be perpendicular (90°) from Flush rail surface with a
gap of 5.0mm from the nominal edge of the part.

Fixture Construction Tolerances

All Datums and Nets used to position the part in the gage are to be located in the gage
within +/- 0.05 mm.

All fixture details such as check pins and bushings, details used for electronic measuring
devices, etc. which check part features are to be located within +/- 0.10 mm.

Surface contour features for in-line/feeler checks are to be within +/- 0.15 mm.

Trim line features for in-line/feeler checks are to be within +/- 0.15 mm.

Templates are to be within +/- 0.15 mm.

Sight checks are to be within +/- 0.25 mm.

Our production detail

Quality Control

CMM (3D Coordinate Measuring Machine), Vms-2515G 2D Projector, HR-150 A Hardness Tester

Third Party Certification done by ShenZhen Silver Basis Testing Technology Co., Ltd , ISO17025 Certified

Lead time & Packing

35 days after 3D design approved

7 days via express: FedEx

Standard Export Wooden Case

Primary Competitive Advantages

Pursuit Of Quality Excellence

Multiple Products & Services

Efficiency Consciousness-On-Time Delivery

Cost Consciousness-Innovative Design Solutions To Reduce The Cost

Timely Communication With Our Customer

Compliance With Cooperator’s Terms And Conditions

NDA(Non-disclosure Agreement)

Our purpose is that we can only succeed if our customers succeed.